AFE Stage 2 SI Air Intake with PRO 5R Filter; CHEVY/GMC Trucks/SUVs 2007-2008 V8-4.8L/5.3L/6.2L (GMT900); #54-81072

The aFe Magnum Force Stage 2 Intake replaces the entire stock air induction system – all the way to the throttle body or turbo housing. You’ll get the parts you need to replace the stock air box, the stock filter, and the stock intake tract – leaving only the stock electronics to deal with (and your new aFe system is engineered to work with your existing electronics). After installation of one of AFE's Stage 2 intake systems, you’re ready for other more upgrades like exhausts and performance modules that will give you even more power.

-- AFE STAGE 2 with PRO 5 R Filter Media--
AFE Pro 5 R air filter is their STREET and OVERALL Performance filter. Far & away from your stock paper filter, the PRO 5 Media  provides you with 5 layers of excellent air flow and filtration characteristics in a reusable package.  This filter is for the every day consumer who is not taking their vehicle off-road a lot or live in very dusty, sandy areas. If your seeking better performance in HorsePower, Fuel Economy, and overall Engine Quality----this is where you start.

PART NUMBER:  54-81072
FITS: GM Trucks/SUVs, 2007-2008 V8-4.8L/5.3L/6.2L (GMT900 ENGINE..90% of the models)
ALL CHEVY AND GMC MODELS WITH THESE ENGINE SIZES

Shipping is Free but there is a small fuel surcharge the goes from $6-$10 per order.
Ships next business day and arrives in 2 to 3 days.
Orders before 2pm ship same day.
ACTUAL IMAGE

If you want maximum performance, then get an aFe Stage 2 intake system. No other intake gives you the same amount of torque and power for your money. aFe designed the top-of-the-line Magnum FORCE Stage 2 cold air intake for the demanding auto enthusiast. Whether it is an spark-ignition gas or a compression-ignition diesel, the more air the engine receives, the more power it generates. For powered enhanced vehicles, with turbocharger, NOS, propane or a performance module; without more air, you are not getting maximum power. The Magnum FORCE Stage 2 systems provide all the air you need.

Unlike other aftermarket air intake systems, the Magnum FORCE Stage 2 intake system replaces the entire stock air induction system to the throttle body or turbo housing. Remembering aFe's motto Stock Sucks, they eliminated the stock air box, the stock air filter and the stock intake tract. The only thing retained is the stock electronics, to ensure that their Stage 2 system works with the stock electronics.

Cold air equals more power, aFe systems maximize your vehicle's performance with the largest air box for each vehicle application. Even though aFe made it as large as possible they were careful to use your vehicle's stock mounting points. There is no need to cut or drill anything when you install an aFe intake kit. Another advantage of such a big air box is that aFe can design in the largest air filter possible.

At first glance you probably wont notice the unique features in each aFe air box design. Each of them is there for a purpose, either to make your job of installing the system easier or to improve the performance of your vehicle. Here are some benefits that distinguish aFe's Magnum FORCE Stage 2 intake systems:

• 16-gauge powder-coated steel Durable, OE look finish
• Trim sealed or covered Seals out hot engine air
• Secured PEM-nuts Easier installation
• Welded and preassembled sheet metal Faster Installation
• Pre-positioned opening for Stock attachments
  
• No dangling wires, relocating hoses or tubes.
• 3-angle velocity stack adaptor on some applications
• Powder-coated covers on some applications

As you can see, aFe put a lot of effort into designing each air box to fit each vehicle. It takes a little more time and effort but aFe did it to make the job of installing our systems easier.

Finally, aFe installs one of their custom designed and built filters that is custom tailored for each box, maximizing the amount of surface area for decreases air resistance. By designing the largest filter for the largest air box, aFe is able insure that the vehicle is getting the maximum amount of air regardless of the performance upgrades. aFe's Magnum FORCE Stage 2 intake system uses their conical universal clamp-on filters for ease of cleaning.

Typical design characteristics of aFe's custom designed air filter elements:

• 100% poly urethane construction Durable, resistant to high temperature and chemicals
• Deep pleats Greater flow and dust holding capacity
• Rounded pleat geometry Better airflow characteristics
• Full or modified velocity stack Better airflow characteristics
• Washable/reusable filter media Longer service life.

Letting more air in through the filter and keeping the hot air out doesnt help much if you cant get the air to the motor smoothly and efficiently. aFe intake systems use heat blocking molded tubes because you just cant bend a steel or aluminum tube to accommodate the modern engine compartment. With a molded tube, you can remove kinks, sharp bends and obstructions that restrict airflow. By tapering the tube, you can accelerate the airflow for more torque and better throttle response